Hi all,
Looking for a little help please.
Sent my 11B bulkhead for repair, guy has gone bust & my bulkhead I’m sure has been scrapped!!
So question is, would series 2 bonneted bulkhead fit with modifications?
Or is there anybody who has a repairable 11B bulkhead that they would consider parting with?
Any, all help would be gratefully appreciated.
Cheers Steve
Bulkhead Questions
-
NZ2AFC
- Running on six!
- Posts: 148
- Joined: Thu Oct 25, 2012 10:19 am
- Location: Wellington, New Zealand
Re: Bulkhead Questions
Hello Steve,
yes a standard bulkhead from a similar year will be a suitable replacement. It will need a few extra holes and the ribbed floor panel replaced with a flat panel.
I have just done the same on my 2A FC, but i still had the original rusty bulkhead to copy.
yes a standard bulkhead from a similar year will be a suitable replacement. It will need a few extra holes and the ribbed floor panel replaced with a flat panel.
I have just done the same on my 2A FC, but i still had the original rusty bulkhead to copy.
Series One 112602729 Fire Tender
Series One 112801455 Topless
Series One 112801540 Hard Top
1963 2a Forward Control 28700207A
1992 D90 Tdi
1993 RRC Tdi
1993 Discovery Tdi
Series One 112801455 Topless
Series One 112801540 Hard Top
1963 2a Forward Control 28700207A
1992 D90 Tdi
1993 RRC Tdi
1993 Discovery Tdi
-
skelly4720
- Newbie
- Posts: 4
- Joined: Sat Nov 17, 2012 8:32 pm
Re: Bulkhead Questions
Hi NZ2FC
Thanks very much for the reply.
Cheers Steve
Thanks very much for the reply.
Cheers Steve
-
DasLandRoverMan
- The 1-Ton Welder
- Posts: 1334
- Joined: Sat Oct 20, 2012 9:33 am
- Location: West Lakes
- Contact:
Re: Bulkhead Questions
Yeah, standard ones can be fairly easily altered to suit.
Who was doing your original?
Who was doing your original?
Who is online
Users browsing this forum: No registered users and 12 guests