Rim rims rims...

General Landrover stuff, greenlane trips, shows, journeys, stories, etc.
User avatar
Wheeledbeast
In overdrive
Posts: 1360
Joined: Mon Apr 15, 2013 1:41 pm

Re: Rim rims rims...

Postby Wheeledbeast » Fri Jun 13, 2014 12:16 pm

Had to get one of the wheels of to look at the brakes, so had a quick look for a part number, I also measured the distance from the outer flange that is parallel to the direction of travel of the wheel (i.e. the flange that the tyre bead sits on the back of) to the parallel flange that the wheel studs go through ( I.e. the one that the drum touches the back of). I thought this would be a good estimate of offset and eas- ish to measure :? . I got 62mm anyway, does that sound about right :?:
Image
Just out of interest I thought I would throw this one in too, The wheel on the right Is a standard MOD spec Split rim from the mid sixties, the one on the left is a 5.5 rim from around 2000. Not great photos , but the general impression most people get is that the mod rim has the widest offset. If you measure them ( as described above) you find they have exactly the same offset ( 38mm) it is just the curved lip on the bolt flange is much smaller on the split rims. :o
Image

User avatar
Wrecker
Running on six!
Posts: 153
Joined: Mon Oct 22, 2012 8:41 am

Re: Rim rims rims...

Postby Wrecker » Fri Jun 13, 2014 9:32 pm

Now we have LWB rims being passed off as 1 Ton rims;

http://www.ebay.co.uk/itm/Barnfind-land ... 2a3e2a4695

yostumpy
Low Range
Posts: 10
Joined: Mon Apr 20, 2015 10:52 am

Re: Rim rims rims...

Postby yostumpy » Mon Apr 20, 2015 7:02 pm

can I ask a simple question, what is the overall width of the 6 1/2" rims.

User avatar
Wrecker
Running on six!
Posts: 153
Joined: Mon Oct 22, 2012 8:41 am

Re: Rim rims rims...

Postby Wrecker » Mon Apr 20, 2015 8:47 pm

The spare I've bought measures 7 9/16" or 192mm across the outer faces.

yostumpy
Low Range
Posts: 10
Joined: Mon Apr 20, 2015 10:52 am

Re: Rim rims rims...

Postby yostumpy » Mon Apr 20, 2015 9:18 pm

so approx 7 1/2 " then, thanks.

yostumpy
Low Range
Posts: 10
Joined: Mon Apr 20, 2015 10:52 am

Re: Rim rims rims...

Postby yostumpy » Wed Apr 22, 2015 5:34 pm

Thats good then, just bought another set :DD of 4 on the bay of e. described as std defender wheels, but looked very deep, so I asked him the o/a width, and he said 7 1/2" :shock: 4no for £42.46 :? not to far away either. Now don't know whether to sell them on, or take 2 (2 spare wheels) and sell 2. Don't know what the numbers are yet, prob pick up on sat.

User avatar
22900013A
The 1-Ton Wonder
Posts: 2615
Joined: Sat Oct 20, 2012 9:22 am
Contact:

Re: Rim rims rims...

Postby 22900013A » Tue May 19, 2015 7:03 pm

Any idea what these are?

Image

They look to me to wider even than 569203s.

Here are Sebs

Image

This appears to be another set of the "even wider than"s...

Image

As the rim cannot be pushed any further back than as they are on a 569203, do these have some kind of wider or differently constructed outer section? Or is what we see an optical illusion caused by the smaller tyres?

As an aside, here are some stampings from my 569204 rims on my cherrypicker.

Image

Image
http://sebvehicles.blogspot.co.uk/
http://eblrs.org/
1966 IIA Swb 24125067C ex-SEB managers vehicle HMO968D
1969 IIA 1-Ton 22900013A ex-SEB NBK148G
1972 III 1-Ton 26600078A ex-SEB Cherrypicker VJT440L
1973 III 1-Ton 26600082B ex-SEB MRX287L

User avatar
JPC
Running on six!
Posts: 219
Joined: Tue Nov 06, 2012 2:23 pm
Location: Pretoria ZA

Re: Rim rims rims...

Postby JPC » Tue May 19, 2015 7:37 pm

22900013A wrote: Or is what we see an optical illusion caused by the smaller tyres?
I have a set of these "deepest ever....canyon deep" deep dish 203s and they seem no different than the "normal' 203s I have, other than the dish and rivet positions. I would agree with optical illusion.

yostumpy
Low Range
Posts: 10
Joined: Mon Apr 20, 2015 10:52 am

Re: Rim rims rims...

Postby yostumpy » Thu Jun 04, 2015 6:48 am

yostumpy wrote:Thats good then, just bought another set :DD of 4 on the bay of e. described as std defender wheels, but looked very deep, so I asked him the o/a width, and he said 7 1/2" :shock: 4no for £42.46 :? not to far away either. Now don't know whether to sell them on, or take 2 (2 spare wheels) and sell 2. Don't know what the numbers are yet, prob pick up on sat.
Image
These turned out to be ANR1534, all with just one coat of satin black, not layers of military paint.

DasLandRoverMan
The 1-Ton Welder
Posts: 1334
Joined: Sat Oct 20, 2012 9:33 am
Location: West Lakes
Contact:

Re: Rim rims rims...

Postby DasLandRoverMan » Fri Jun 05, 2015 7:08 am

Still a good buy at £43.
Westlakes All Wheel Drive

Carpe Dentum - Sieze the Teeth!!!


Who is online

Users browsing this forum: No registered users and 0 guests