101 rims

General Landrover stuff, greenlane trips, shows, journeys, stories, etc.
Post Reply
Drum
High range
Posts: 47
Joined: Wed Dec 04, 2013 1:36 am

101 rims

Postby Drum » Fri Dec 06, 2013 5:39 pm

I have 5 of these six stud rims. I could do with some 6.5 inch rims for the tacr and was considering two options.

1 - sell the 101 rims to fund a set of 204s or similar.
2 - drill the rivets out and weld in 5 stud centres.

Opinions on these crazy ideas welcome.
User avatar
Wheeledbeast
In overdrive
Posts: 1360
Joined: Mon Apr 15, 2013 1:41 pm

Re: 101 rims

Postby Wheeledbeast » Mon Dec 09, 2013 9:19 am

Wont you have all sorts of alignment/balance problems if you try to change the centres :?:
User avatar
22900013A
The 1-Ton Wonder
Posts: 2615
Joined: Sat Oct 20, 2012 9:22 am
Contact:
Contact 22900013A

Re: 101 rims

Postby 22900013A » Mon Dec 09, 2013 9:23 am

I thought cutting the centre out and replacing it was known as "banding" and is illegal?
http://sebvehicles.blogspot.co.uk/
http://eblrs.org/
1966 IIA Swb 24125067C ex-SEB managers vehicle HMO968D
1969 IIA 1-Ton 22900013A ex-SEB NBK148G
1972 III 1-Ton 26600078A ex-SEB Cherrypicker VJT440L
1973 III 1-Ton 26600082B ex-SEB MRX287L
DasLandRoverMan
The 1-Ton Welder
Posts: 1334
Joined: Sat Oct 20, 2012 9:33 am
Location: West Lakes
Contact:
Contact DasLandRoverMan

Re: 101 rims

Postby DasLandRoverMan » Mon Dec 09, 2013 6:22 pm

Banding is cutting a rim in half an welding a piece of 'tube' in the middle to make it wider.

What you're thinking of is possible, although given the comparative rarity of 101 rims, I'd sell them and find something else to put a set of 5 stud centres in, be it a set of Disco steelies or perhaps some 8 spokes.

You can often find people giving the Disco ones away...
Westlakes All Wheel Drive

Carpe Dentum - Sieze the Teeth!!!
Drum
High range
Posts: 47
Joined: Wed Dec 04, 2013 1:36 am

Re: 101 rims

Postby Drum » Mon Dec 09, 2013 10:42 pm

DasLandRoverMan wrote:Banding is cutting a rim in half an welding a piece of 'tube' in the middle to make it wider.

What you're thinking of is possible, although given the comparative rarity of 101 rims, I'd sell them and find something else to put a set of 5 stud centres in, be it a set of Disco steelies or perhaps some 8 spokes.

You can often find people giving the Disco ones away...
That's a good idea. :DD

Anyone want to buy some 101 rims?
User avatar
JPC
Running on six!
Posts: 219
Joined: Tue Nov 06, 2012 2:23 pm
Location: Pretoria ZA

Re: 101 rims

Postby JPC » Tue Dec 10, 2013 6:02 am

Drum wrote:I have 5 of these six stud rims. I could do with some 6.5 inch rims for the tacr and was considering two options.

1 - sell the 101 rims to fund a set of 204s or similar.
2 - drill the rivets out and weld in 5 stud centres.

Opinions on these crazy ideas welcome.
.
Last edited by JPC on Tue Dec 10, 2013 10:52 am, edited 1 time in total.
DasLandRoverMan
The 1-Ton Welder
Posts: 1334
Joined: Sat Oct 20, 2012 9:33 am
Location: West Lakes
Contact:
Contact DasLandRoverMan

Re: 101 rims

Postby DasLandRoverMan » Tue Dec 10, 2013 7:41 am

Oooh, smart!!!
Westlakes All Wheel Drive

Carpe Dentum - Sieze the Teeth!!!
Drum
High range
Posts: 47
Joined: Wed Dec 04, 2013 1:36 am

Re: 101 rims

Postby Drum » Tue Dec 10, 2013 8:19 am

Cheers JPC 8-)
135H
High range
Posts: 82
Joined: Wed Jan 23, 2013 10:26 pm

Re: 101 rims

Postby 135H » Tue Jan 14, 2014 7:14 pm

Stab in the dark: would 101 hubs/drum fit on a series stub axle?
cow mop
Petrol sniffer
Posts: 26
Joined: Wed Feb 06, 2013 11:19 am

Re: 101 rims

Postby cow mop » Tue Jan 14, 2014 8:22 pm

hubs are bigger

how much do you want for the rims?
Post Reply

Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 9 guests